Single S Non-woven Fabric Production Line: Advantages of Non-woven Fabric

　　Single S non-woven fabric production lineMaintenance of non-woven fabric: The maintenance and storage of non-woven fabric should pay attention to the following points:

1. Keep it clean, change it frequently, and prevent insect infestation.

2. When storing in different seasons, be sure to wash, iron, and dry it, seal it in a plastic bag, and lay it flat in the wardrobe. Pay attention to light shielding to prevent fading. Ventilate regularly to remove dust and moisture, and avoid exposure to sunlight. The wardrobe should be mildew-proof and insect-proof to prevent cashmere products from getting damp and moldy.

3. When wearing it inside, the lining of the matching coat should be smooth. Hard objects such as pens, key bags, and mobile phones should not be placed in pockets to avoid local friction and pilling. Try to minimize friction with hard objects (such as sofa backs, armrests, and tabletops) and hooks while wearing. It is not easy to wear for too long, so it should be stopped or changed after about 5 days to allow the clothes to regain elasticity and avoid fiber fatigue damage.

4. If pilling occurs, do not pull hard. Use scissors to cut off the pills, so that it won't be irreparable due to thread shedding.

　　Single S non-woven fabric production lineAdvantages of non-woven fabric:

1. Lightweight: The main raw material produced is polypropylene resin, which has a specific gravity of only 0.9, only three-fifths of that of cotton. It is fluffy and has a good hand feel.

　　2.Single S non-woven fabric production lineIndicates softness: Composed of fine fibers (2-3D), it is formed by thermal melting and bonding through light spots. The finished product is soft, comfortable, and moderate.

3. Drainage and breathability: Polypropylene slices do not absorb water, with a moisture content of zero, and the finished product has good drainage. It is made of fibers with porosity and good breathability, making it easy to keep the fabric dry and easy to wash.

　　4.Single S non-woven fabric production lineIndicates non-toxic and non-irritating: The product uses FDA-compliant raw materials, free from other chemical components, with stable performance, non-toxic, odorless, and non-irritating to the skin.

5. Antibacterial and chemical-resistant: Polypropylene is a chemically passive substance, not susceptible to insect damage, and can isolate liquids and insect erosion; it is antibacterial, resistant to alkaline corrosion, and the strength of the finished product is not affected by erosion.

6. Antibacterial properties. The product absorbs water, does not mold, can isolate liquids and insect damage, and does not mold.

7. Good physical properties. It is made of polypropylene fibers, directly laid into a net and thermally bonded. The strength of the product is superior to that of ordinary short fiber products, with isotropic strength, and similar strength in both longitudinal and transverse directions.

　　8.Single S non-woven fabric production lineIndicates that in terms of environmental protection, most of the raw materials used for non-woven fabrics are polypropylene, while the raw materials for plastic bags are polyethylene. Although the names of these two substances are similar, their chemical structures are quite different. The chemical molecular structure of polyethylene is relatively stable, so plastic bags take 300 years to decompose. In contrast, the chemical structure of polypropylene is not stable, and the molecular chains can easily break, allowing for effective degradation. Moreover, it enters the next environmental cycle in a non-toxic form, and a non-woven shopping bag can completely decompose within 90 days. Additionally, non-woven shopping bags can be reused more than 10 times, and the environmental pollution caused by waste is only 10% of that of plastic bags.